Green Roof Solutions edge restraints in anodized aluminum, cut stainless steel, and other options to frame any living roof including pitched roof designs.

Edge Restraints

Standard Edge Restraints

Green Roof Solutions edge restraint are the frame for your green roof project. We manufacture a wide range of edging to retain green roof systems and properly trim and detail roof penetrations. Our extensively field-tested and proven edging promotes proper drainage for your extensive or intensive green roof system. Our edge restraints are bent at a 90-degree angle (custom angles are possible for sloped applications) with slots on the vertical leg to provide lateral drainage. The slots come all the way to the bottom of the angle to facilitate any level of moisture and promote drainage in any storm event. The "L" shape ensures that there are no sharp corners on the roof membrane. Our high-strength materials are lightweight, long-lasting, and easy to assemble. We provide edging in both straight and flexible contour cuts to suit your design needs.

Our standard edging comes in 8' lengths and is .10" thick 5052 aluminum. We also offer custom edging in various alloys, thicknesses, and colors. We can provide different gauges of aluminum, stainless steel, copper, and Corten steel. We offer a full line of epoxy powder coating or hard anodizing on all edging products. The slots are designed for a calculated flow rate of 26 gallons per minute (gpm) given a 1" storm event. All components meet or exceed the flow rate standards set by FLL and ASTM.

Standard sizes for the GRS edge restraints are 3" tall up to 8.5" tall in 0.5" increments.

Custom Edging

Custom edging is available in stainless steel, laser cut, copper, powder coat, Corten steel, anodized aluminum, torch down, and PVC coated.

Green Roof Solutions can help you with all of your custom edge restraint needs. We manufacture custom products for architects and installers across the country and pride ourselves on the ability to work with clients to enable them to get the most out of their project. From simple edging with no slots to laser-cut custom designs and custom angles for pitched roofs, we can do it all. Common custom metals include stainless steel, copper, Corten steel, and epoxy powder-coated aluminum in a wide range of colors.

Contact us to discuss your project. We are confident that we can help you with a custom Green Roof Solution.

Edge Restraint Dimensions

Straight Edge
3" x 4"3.5" x 3.5"
4" x 3"4.5" x 4.5"
5" x 4"5.5" x 3.5"
6" x 5"6.5" x 4.5"
7" x 4"7.5" x 6.5"
8" x 6"8.5" x 5.5"
Flexible Edge
3" x 3.14"3.5" x 3.14"
4" x 3.14"4.5" x 3.14"
5" x 3.14"5.5" x 3.14"
6" x 3.14"6.5" x 3.14"
7" x 3.14"7.5" x 3.14"
8" x 3.14"8.5" x 3.14"

Edge Restraint Accessory Dimensions

Corners
2.5" x 4" x 4"5" x 2.5" x 2.5"
7" x 2.5" x 2.5"9" x 2.5" x 2.5"
Clips
2.5" x 4"

Note that the 5", 7", and 9" finish corners are for taller edge restraint.

All products made in the United States unless otherwise noted